Rubber Accelerator-Stearic Acid

Chemical Name: Stearic acid Molecular Formula: CH3(CH2)16COOH Molecular weight: 284.47 CAS NO: 57-11-4

Rubber Accelerator-CBS (CZ)

Product properties & Features Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. Soluble in benzene, boluene, chloroform, CS2, CH2C12 acetone. Ethyl acetate, hardly soluble in alcohol insoluble in water, gasoline, acid /alkali with lower concentration. Usage: A medium fast primary accelerator suitable for NR，IR，SBR，NBR，HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing emperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone when activated by DPG, TMTD and TS. The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight.

Rubber Accelerator-MBTS (DM)

Chemical Name: Dibenzothiazole Disulfide Structure: Molecular Formula: C14H8N2S4 Molecular weight: 332.50 CAS NO: 120-78-5

Rubber Accelerator- TBBS (NS)

Product properties & Features: Gray white powder (granule). The density is 1.26-1.32.soluble in benzene. CS2, methyl alcohol, acetone. Chloroform, alcohol, insoluble in gasoline, water, acid and alkali with lower concentration. Usage: Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra-accelerators in tire compounds or industrial rubber products low poison and high efficiency. It’s good back up for NOBS. Be regarded as standard accelerator Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.

EVA

Molecular Formula: (C2H4) x. (C4H6O2)y CAS NO: 24937-78-8 Specification: Performance Rating System of units Test method Density 0.940 g/cm3 ISO 1183/A Soluble volumetric fluidity ( MVR ) ( 190 ° C / 2.16 kg ) 0.200 cm3/10min ISO 1133 Tensile modulus...

CR232

Polychloroprene Rubber CR 232

Rubber Vulcanization- DBPH

USES: Vulcanizing agent, used for silicone rubber, polyurethane rubber, ethyl-propylene rubber, and other rubber, can improve the tensile strength and hardness of products, and the elongation and compression deformation are low, the smell after vulcanization in alkyl peroxide is the smallest. Its usage can be mixed in the rubber material when mixing. Crosslinking agent, can be used for polyethylene; Unsaturated polyester curing agent. The tensile strength and hardness of the products are high. Storage method: Open fire is strictly prohibited in storage sites, away from heat sources, to prevent static electricity, direct sunlight ( exposure to the sun ) and violent impact; Stay away from fire sources, acidic, alkaline and flammable materials. Should have good ventilation, room temperature should be under 25 ℃ storage.

WS resin

Product profile and application: 1. WS sulfide resin is a kind of thermal reaction octyl phenolic resin with hydroxymethyl at both ends. 2. Mainly vulcanized butyl rubber, ethylene-propylene diene rubber, nitrile butadiene rubber, neoprene rubber, natural rubber, etc. 3. Soluble in toluene, xylene, ethane, ketones and other aromatic solvents and aliphatic solvents. 4. WS vulcanized resin is mainly used for tire capsule, air tire, medical butyl rubber plug, sealing rubber ring, rubber tube and other rubber products, can be directly added to the rubber during mixing, vulcanized rubber has excellent high heat resistance, high pressure, aging resistance.

Sodium- MBT (Na MBT)

Mainly used in the manufacture of tires, tape, rubber shoes and other industrial rubber products. This product is the rubber industry universal type accelerator, has the quick vulcanization function to the natural glue and the general sulfur vulcanization synthetic glue. In natural gum and styrene butadiene latex as promoter of dithiocarbamate. Easy to disperse in rubber, no pollution, suitable for natural vulcanized rubber paste and hot water vulcanized products. The solution made of water and alcohol can be used as corrosion inhibitor for steel, copper and aluminum products. Storage Storage for six months in dry and cooling place.